TABO PRODUCTS

TABO Furnace - TABO Insertion Unit - TABO Insertion Wagon - The TABO Story

The classic TABO VL-A cremator THE TABO FURNACE
TABO has been known as a world standard for cremation furnaces and few furnaces are so widely used as the TABO standard cremator. TABO has manufactured cremation furnaces since 1932 and focus has always been on first-class quality. Many TABO furnaces last for more than 20 years, and some even over 30 years.

The TABO cremator
The furnace main burning and post-combustion chamber are built in high-temperature resistant refractory. A pre-heater device preheats the combustion air. Through many layers of isolation material as well as recovery of heat, an economic operation can be achieved, as well as a low temperature on the cladding. When starting, the furnace is preheated to 700-800ºC, and then no extra energy is added.

The furnace is the result of a careful study of the cremation process, allied with considerable practical experience over many years. Thanks to modern technology the furnace is energy saving and environmental friendly. It satisfies the need for efficient cremation under hygienic conditions with a smoke-, odour- and dust-less process. Other major advantages are the extremely low sound level and high efficiency, a normal cremation with a TABO furnace takes 60-80 minutes.

Post-combustion
For many years our furnaces have been equipped with post-combustion chamber, which is absolutely essential for reduction of the hydrocarbons present.

The micro processor
A microprocessor with electronic boards controls the regulation of temperature, air supply, draught regulation and smoke density. The computer panel has clear symbols to ensure easy error-free operation.

Energy saving construction
Due to heavy refractory walls and very efficient heat insulation, successive cremations can normally be made without additional heat from the burner. The combustion air is preheated to a very high temperature from the heat stored in the refractory during the first stage of the cremation cycle. The preheated air speeds up the combustion process and prevent decay of chamber temperature.

Environmental requirements
Automatic control normally results in flue gases without smoke and odour. Any potential increase in smoke is automatically detected and the air increased so that waste gases are completely combusted at a sufficiently high temperature to eliminate odours.

Safe and silent
A sophisticated security system gives complete protection against occupational accidents. The noise level is very low. The automatic control maintains a slight negative pressure in the cremation chamber and thereby prevents any unpleasant smell in the crematory room. Low outlet velocity from the cremation chamber prevents fly ash from becoming entrained with the waste gases.

Insertion
An insertion wagon with an electro-hydraulic lift-device is optionally available. The insertion wagon is manufactured for safe operation and good working environment for the operator. The insertion wagon can be delivered for both one-level and two-level installations. There is an optional automatic insertion wagon.

The TABO cremator:
- High capacity - automatically controlled air supply and damper
- Recuperation - no additional supply of heat
- Smokeless - odourless and dust free emission of waste gases
complies completely with environmental requirements
- Easy handling - one man can operate up to 3 cremators
- Convenient - only a flat hearth to rake
- Duplicate systems - insurance against power failure

  1. Charge door
  2. Cremator vault - Heat storage
  3. Secondary air
  4. Primary air Top
  5. Primary air Bottom
  6. Service door
  7. Inspection opening
  8. Hopper
  9. Movable grate
10. Ash pan
11. Cremator hearth
12. Flue gas damper
13. Micro processor
14. Tertiary air
15. Main burner
16. Post combustion burner
17. Post combustion chamber

The classic TABO VL-A cremator	THE TABO FURNACE TABO has been known as a world standard for cremation furnaces and few furnaces are so widely used as the TABO standard cremator. TABO has manufactured cremation furnaces since 1932 and focus has always been on first-class quality. Many TABO furnaces last for more than 20 years, and some even over 30 years. The TABO cremator The furnace main burning and post-combustion chamber are built in high-temperature resistant refractory. A pre-heater device preheats the combustion air. Through many layers of isolation material as well as recovery of heat, an economic operation can be achieved, as well as a low temperature on the cladding. When starting, the furnace is preheated to 700-800ºC, and then no extra energy is added.
The furnace is the result of a careful study of the cremation process, allied with considerable practical experience over many years. Thanks to modern technology the furnace is energy saving and environmental friendly. It satisfies the need for efficient cremation under hygienic conditions with a smoke-, odour- and dust-less process. Other major advantages are the extremely low sound level and high efficiency, a normal cremation with a TABO furnace takes 60-80 minutes. Post-combustion For many years our furnaces have been equipped with post-combustion chamber, which is absolutely essential for reduction of the hydrocarbons present. The micro processor A microprocessor with electronic boards controls the regulation of temperature, air supply, draught regulation and smoke density. The computer panel has clear symbols to ensure easy error-free operation. Energy saving construction Due to heavy refractory walls and very efficient heat insulation, successive cremations can normally be made without additional heat from the burner. The combustion air is preheated to a very high temperature from the heat stored in the refractory during the first stage of the cremation cycle. The preheated air speeds up the combustion process and prevent decay of chamber temperature. Environmental requirements Automatic control normally results in flue gases without smoke and odour. Any potential increase in smoke is automatically detected and the air increased so that waste gases are completely combusted at a sufficiently high temperature to eliminate odours. Safe and silent A sophisticated security system gives complete protection against occupational accidents. The noise level is very low. The automatic control maintains a slight negative pressure in the cremation chamber and thereby prevents any unpleasant smell in the crematory room. Low outlet velocity from the cremation chamber prevents fly ash from becoming entrained with the waste gases. Insertion An insertion wagon with an electro-hydraulic lift-device is optionally available. The insertion wagon is manufactured for safe operation and good working environment for the operator. The insertion wagon can be delivered for both one-level and two-level installations. There is an optional automatic insertion wagon. The TABO cremator: - *High capacity* - automatically controlled air supply and damper - *Recuperation* - no additional supply of heat - *Smokeless -* odourless and dust free emission of waste gases complies completely with environmental requirements - *Easy handling* - one man can operate up to 3 cremators - *Convenient* - only a flat hearth to rake - *Duplicate systems* - insurance against power failure
	1. Charge door 2. Cremator vault - Heat storage 3. Secondary air 4. Primary air Top 5. Primary air Bottom 6. Service door 7. Inspection opening 8. Hopper 9. Movable grate 10. Ash pan 11. Cremator hearth 12. Flue gas damper 13. Micro processor 14. Tertiary air 15. Main burner 16. Post combustion burner 17. Post combustion chamber